|
|
 Femoral
Hip Stem
BioPro® PSL
Horizontal Platform Support Stands the Test of Time
The Biopro Physiologically Stress Load Hip Stem provides
the ultimate design in Hip Joint Replacement. The Biopro
implant is designed to be physiologically stress loaded
and incorporates a collar that is at an angle perpendicular
to the resultant forces of body weight and muscle forces.
The design eliminates adaptive bone remodeling and stress
shielding which a known cause of bone loss following
joint replacement. The time tested design comes in porous
coated and non-porous coated versions in two different
lengths and thirteen sizes. The PSL is a very successful
stem showing outstanding long term resuts.
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
 Fracture
Hip Stem
BioPro® Optima
Utilizing a Horizontal Platform Support
The Biopro Optima Stem provides a low cost option
in Hip Joint Replacement. The Optima implant is designed to
be physiologically stress loaded and incorporates a collar
that is at an angle perpendicular to the resultant forces
of body weight and muscle forces. The design eliminates adaptive
bone remodeling and stress shielding which a known cause of
bone loss following joint replacement.
|
| |
|
|
| |
|
|
| |
|
|
|
|
 Resurfacing
BioPro® Total Articular Replacement
Arthroplasty
Conservative Joint Replacement
The Biopro Total Articular Replacemnt Arthoplasty
utilizes the advantages of ceramic bearing surfaces. This
conservative bone preserving prosthesis can be used as a hemi-arthorplasty
or a total arthroplasty. The implant requires the resection
of one third of the femoral head. Preserving the maximum amount
of bone possible. It is an excellent option for avascular
necrosis or arthritis of the hip where the acetabular cartilage
is still in good condition. The implant provides patients
with an excellent option over conventional hip replacement.
In the event that total replacement is necessary in the future
the minimum resection required for the Biopro implant allows
for sufficient bone stock for conversion to a primary total
hip.
|
| |
|
|
| |
|
|
| |
|
|
|
|
 Acetabular
Component
BioPro® Cox Comb Cup
Greater Range of Motion Reduced Dislocation
The Biopro Cox Comb Cup is a low profile acetabular
component that provides immediate mechanical fixation. The
cup feature and fin and low profile design allow for optimum
stability with or without screws. The patented cup insert
has a snap lock mechanism that utilizes a unique hood that
minimize dislocation. The side cut outs allow for maximum
range of motion. The peripheral feet prevent any protrusion
into the acetabulum after implantation.
|
| |
|
|
| |
|
|
|
|
 Acetabular
Component
BioPro® Providence Cup
Simple and Conservative
The Providence Cup is a low profile cup which
requires minimum bone resection. It has standard and 10 degree
lipped cups to help reduce dislocation risk. The implant is
made of titanium with porous coated beads.
|
| |
|
|
| |
|
|
|
|
 Acetabular
Component
BioPro® All Poly Cemented Cup
Cost Effective Versatility
The All poly Cemented Cups from Biopro maintain
all of the patented features of the Biopro Cox Comb Cup implant.
With an excellent cement interface the one piece implant can
be cemented in place and provide excellent range of motion
and dislocation protection.
|
| |
|
|
| |
|
|
|
|
 Acetabular
Component
BioPro® Rimmed Acetabular Cup
For Reconstructive Revision
The Biopro rimmed acetabular component is an
outstanding revision implant. For patients with protrusio
or a deficient acetabulum, this implant offers a stable platform
for reconstructive hip replacement surgery.
|
| |
|
|
